Filter
Top Products
32 Receiving Faxes
ENGLISH
Receiving Faxes
Different ways to receive a document
Your fax provides you with several modes for receiving documents. To determine which mode best
suits your requirements, see the table below.
* This setting is only available for some countries.
<Fax/Tel Mode>/<NET SWITCH>*
Automatically switches between fax
and voice calls. Receives documents
automatically and rings for voice calls
(see page 33).
<NET SWITCH>:
If your telephone service allows you to
have one telephone line with two
numbers: one for fax and one for
telephone, use this mode. Subscribe to
the Telstra FaxStream Duet service
(Australia) or the Telecom FaxAbility
service (New Zealand) (see page 35).
<MANUAL MODE>
Rings for every call, regardless of
whether the call is a fax call or a voice
call. For a fax call, you have to
manually activate reception of the fax
(see page 34).
<ANS.MACHINE MODE>
Receives documents automatically
and routes voice calls to the answering
machine. Connect an answering
machine to your fax (see page 34).
For the JX510P model, cancel TAM
mode.
<FAX ONLY MODE>
Answers all calls as fax calls. Receives
documents automatically and
disconnects voice calls. Separate
telephone line for fax use only. If you
want to be alerted when a fax call is
received, enable the <INCOMING
RING> setting (see page 57).
F
AX
INCOMING CALL...
RECEIVE
INCOMING CALL...
Ring
Ring
Ring
Ring
INCOMING CALL ...
FAX
FA
X
RECEIVE
Ring
Ring
LINE
INCOMING CALL...
IN USE
FAX
RECEIVE
INCOMING CALL...
Pick up the Handset to answer
the call. You can not answer
with your external device.