Filter
Top Products
4 Introduction
ENGLISH
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use the
machine safely. Do not attempt to use the machine in any way not described in this manual.
Warning
z This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
z You may cause an electric shock, fire, or damage the machine if you ignore any of these safety
precautions.
Choosing a location Do not place the machine close to flammable solvents such as alcohol or thinners.
Power supply Never attempt to plug in or unplug the machine from the power supply when your hands are
wet.
Always push the plug all the way into the power outlet.
Never damage, modify, stretch or excessively bend or twist the power cord. Do not place
heavy objects on the power cord.
Never plug the machine into a power socket that is shared with other equipment (extension
lead/cord, 2- or 3-way adapter, etc.).
Never use the machine if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange noises around the machine, immediately
unplug the machine at the power supply and call for service.
Periodically, unplug the machine and use a dry cloth to wipe off any dust or dirt collected on
the plug and the power outlet.
If the machine is placed at a location exposed to a lot of dust, smoke, or high humidity, the
dust collected on the plug absorbs moisture and may cause insulation failure and fire.
If you hear thunder, disconnect the power supply of the machine and refrain from using it.
Leaving the machine plugged in may cause fire, electric shock, or damage to the machine,
depending on the thunder storm.
Never use a power supply source other than the one rated for the machine in the country of
where you purchased the machine.
AC 100-240 V, 50/60 Hz
Cleaning the machine Use a damp cloth to clean the machine. Never use flammable solvents such as alcohol,
benzene or thinners.
If flammable solvents come in contact with electrical components inside the machine, it
could cause a fire or electric shock.
Always unplug the machine from the power outlet before cleaning the machine.
If you accidentally switch the machine on while cleaning it, you could injure yourself or
damage the machine.
Maintaining the machine Do not attempt to disassemble or modify the machine. There are no user serviceable parts
inside the machine.
The machine contains high-voltage components. Never attempt any maintenance
procedure not described in this guide.
Working around the
machine
Do not use highly flammable sprays near the machine.
This could cause a fire or electric shock if the spray comes into contact with electrical
components inside the machine.