Filter
Top Products
50 Using TAM Mode (JX510P only)
ENGLISH
Forwarding Telephone Messages
This feature allows you to automatically forward telephone messages, recorded when the fax is set
to TAM mode, to a registered forwarding number.
You can use remote control to access the forwarding number and listen to your telephone
messages.
Setting the Forwarding Number
1 Press [Menu].
2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3 Use [{] or [}] to select <TAM SETTINGS>, then press [Start/Copy]. The LCD
displays <MESSAGE LENGTH>.
4 Use [{] or [}] to select <FWD SETTINGS>, then press [Start/Copy]. The LCD
displays <OFF>.
5 Use [{] or [}] to select <ON>, then press [Start/Copy] twice. The LCD displays
<TEL=>.
6 Use the numeric buttons to enter the forwarding number, then press [Start/Copy].
A maximum of 40 digits can be entered.
7 Press [Stop/Reset].
Setting ends and the fax returns to standby mode.
Setting the Number of Redial Times
1 Follow steps 1 to 4 in “Setting the Forwarding Number” on page 50.
2 Use [{] or [}] to select <ON>, then press [Start/Copy]. The LCD displays <FWD
TEL NUMBER>.
3 Use [{] or [}] to select <AUTO REDIAL>, then press [Start/Copy]. The LCD
displays <ON>.
4 Use [{] or [}] to select <ON>, then press [Start/Copy] twice. The LCD displays
<2TIMES>.
5 Use the numeric buttons, or [{] or [}] to enter the number of redial times, then
press [Start/Copy] twice. The LCD displays <2MIN.>.
Note
z You must register a forwarding number and set TAM mode before you can use this feature. Remote
control cannot be used to set this feature unless a forwarding number has been registered.
z If you set <FWD SETTINGS> to <ON> when a forwarding message has not been recorded, you will
hear a tone instead of a forwarding message when telephone messages are forwarded.