Filter
Top Products
64 Routine Maintenance
ENGLISH
However, the error detection function is disabled after the error indication is canceled, therefore,
Low Ink Warning message does not appear later on. When you install a new FINE Cartridge, the
Low Ink Warning is enabled automatically.
Replacing a FINE Cartridge
1 Make sure the fax is turned on.
2 Open the Cover until it locks into place securely at the second bump.
3 Remove the empty FINE Cartridge.
(1) Push down the FINE Cartridge.
(2) Remove the FINE Cartridge.
4 Prepare a replacement FINE Cartridge.
(1) Unpack a new FINE Cartridge and remove the
Protective Tape (A) gently.
Note
z Do not replace the FINE Cartridge while the fax is printing or performing another operation.
z If you need to unplug the fax, wait until it returns to standby mode (time and receive mode
displayed on the LCD). Otherwise the Holder may not be in its home position, causing the FINE
Cartridge to remain uncapped and dry out.
Caution
z Do not try to manually move or stop the Holder.
z Do not touch the metallic parts or other parts inside the machine.
Important
z Handle FINE Cartridges carefully to avoid
staining your clothes or surrounding area.
z Discard empty FINE Cartridges according to local
laws and disposal regulations.
Important
z Shaking FINE Cartridge may cause ink to spill out
and stain clothing or the surrounding area.
Handle FINE Cartridge carefully.
z Be careful not to stain your clothes and hands
with ink on the removed protective tape.
z Do not reattach the Protective Tape once you
have removed it.
z Once the Protective Tape is removed, do not
touch the electrical contacts (B) or Print Head
Nozzles (C) on the FINE Cartridge. The machine
may not print out properly if you touch it.
(1)
(2)
(A)
(C)
(B)