Filter
Top Products
67
E
Message
See page:
Cause and Action Message
See page:
Cause and Action
TOO MANY
CHARACTERS!
SOME WERE NOT
COPIED
TOO MANY
CHARACTERS!
SOME WERE NOT
PASTED
TOO MANY LINES TO
FRAME!
TOO MANY LINES!
• You are trying to copy text
that contains more than 49
characters.
➜
Decrease the number of
characters you are copying.
• Pasting copied text will cause
the number of characters to
exceed the allowable limit for
the location where you are
pasting.
➜
Re-input so the pasted text
does not cause the allowable
number of characters to be
exceeded.
• Printing with a frame will
cause your label to have
more than the allowable
number of lines.
➜
Decrease the number of lines
or change to a wider tape.
• You are trying to print a label
that has more than the
allowable number of lines.
➜
Decrease the number of lines
or change to a wider tape.
47
47
35
23
TOO SHORT TO CUT!
SET/ESC
The unused tape at the
beginning of a numbering label
cannot be cut or cutting
between labels is not possible.
• To print without cutting, press
SET.
After printing is complete,
use scissors to cut the labels.
• To print with auto cutting,
change the settings to
increase the margin width
(from NARROW to MEDIUM,
or from MEDIUM to WIDE).
Left and right margins can
auto cutting can be ensured
by selecting FULL CUT for
the tape cut mode and WIDE
for the margins setting.
26, 38