Filter
Top Products
5-16
User Guide for Internetwork Performance Monitor
OL-11291-01
Chapter 5 Working With IPM From the CiscoWorks Homepage
Viewing Configuration Information
Figure 5-13 Collectors Configuration Report Page
Viewing Path Echo Collector Path Usage Data
You can view the usage percentage for each path in a Path Echo collector’s path list from the CiscoWorks
homepage.
To view path usage data collected by IPM:
Step 1 Select Internetwork Performance Monitor > Reports > Configuration Reports > Collectors.
The Collector Information Report page (Figure 5-13) appears.
Step 2 Select a Path Echo collector in the list and click Path Usage in the Detail column.
The Path Usage page (Figure 5-14) appears, where:
• Path is the specific path in the collector’s path list.
• Count is the number of times the collector has used the path.
• Percentage is the usage percentage for the path. The usage percentage is the Count for this path
divided by the total of all Counts for this path list.
For example, if a Path Echo collector passes through three different paths (p1, p2, and p3) between
its source router and target, and the Counts for those paths are 15, 10, and 5 respectively, then the
Percentage for p1 is 15/(15+10+5)=50%.