Filter
Top Products
2-10
User Guide for Internetwork Performance Monitor
OL-11291-01
Chapter 2 Getting Started With IPM
Configuring the IPM Components
If you must add a large number of source routers to IPM, you can use the Source Configuration window
to add them one by one, but it is more efficient to use a seed file. For information about using a seed file
to add source routers to IPM, see the “Adding Components Using Seed Files” section on page 4-16. For
information about viewing or deleting source routers, see the “Working With Source Devices” section
on page 4-1.
Defining a Target
IPM targets are destination devices for which you want to gather data. A target can be any IP-addressable
device, an SA Agent Responder, or an SNA host.
To define a device as a target:
Step 1 Select Edit > Configuration from the IPM Main Window (Figure 2-2).
The Configuration window (Figure 2-3) appears.
Step 2 Click Targets.
The Target Configuration window(Figure 2-4) appears within the Configuration window.
Figure 2-4 Target Configuration Window