Filter
Top Products
3-21
User Guide for Internetwork Performance Monitor
OL-11291-01
Chapter 3 Using IPM to Measure Network Performance
Measuring Network Performance for IP
To measure performance for a specific path, enable the Loose Source Routing option and add the hops
for the operation to use.
Note Step 6 is valid only if you have selected the protocol as IP in step 5. In case you have selected any other
protocol, this step is not applicable.
Step 7 Click Add.
IPM adds the newly defined operation to the IPM database.
Step 8 Click Close to close the Configuration window.
For more detailed information about the options available from the Echo Operation Configuration
window, see the “Echo Operation Configuration Window” topic in the online help.
Viewing End-to-End Statistics for IP
The IP Echo Historical Statistics window displays statistical and graphical information gathered over the
monitoring period for the selected Echo collector.
To view end-to-end statistics for IP:
Step 1 From the IPM Main Window, select one or more IP Echo collectors (up to 10).
Step 2 Select View > Statistics.
The IP Echo Historical Statistics window (Figure 3-12) appears.
Figure 3-12 IP Echo Historical Statistics Window