Filter
Top Products
Implementing EIGRP on Cisco IOS XR Software
How to Implement EIGRP on Cisco IOS XR Software
RC-149
Cisco IOS XR Routing Configuration Guide
OL-14356-01
Enabling EIGRP Routing
This task enables EIGRP routing and establishes an EIGRP routing process.
Prerequisites
Although you can configure EIGRP before you configure an IP address, no EIGRP routing occurs until
at least one IP address is configured.
SUMMARY STEPS
1. configure
2. router eigrp as-number
3. address-family {ipv4 | ipv6}
4. router-id id
5. default-metric bandwidth delay reliability loading mtu
6. distance internal-distance external-distance
7. interface type instance
8. holdtime seconds
9. bandwidth-percent percent
10. end
or
commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
router eigrp as-number
Example:
RP/0/RP0/CPU0:router(config)# router eigrp 100
Configures an EIGRP routing process.
Step 3
address-family {ipv4 | ipv6}
Example:
RP/0/RP0/CPU0:router(config-eigrp)#
address-family ipv4
Enters an address family configuration mode.