Filter
Top Products
Implementing Routing Policy on Cisco IOS XR Software
How to Implement Routing Policy on Cisco IOS XR Software
RC-411
Cisco IOS XR Routing Configuration Guide
OL-14356-01
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
router bgp as-number
Example:
RP/0/RP0/CPU0:router(config)# router bgp 125
Configures a BGP routing process and enters router
configuration mode.
• The as-number argument identifies the
autonomous system in which the router resides.
Valid values are from 0 to 65535. Private
autonomous system numbers that can be used in
internal networks range from 64512 to 65535.
Step 3
neighbor ip-address
Example:
RP/0/RP0/CPU0:router(config-bgp)# neighbor
10.0.0.20
Specifies a neighbor IP address.
Step 4
address-family {ipv4 unicast | ipv4 multicast |
ipv4 labeled-unicast | ipv4 tunnel | ipv4 mdt |
ipv6 unicast | ipv6 multicast | ipv6
labeled-unicast | vpnv4 unicast | vpnv6 unicast}
Example:
RP/0/RP0/CPU0:router(config-bgp-nbr)#
address-family ipv4 unicast
Specifies the address family.