Filter
Top Products
Implementing RIP on Cisco IOS XR Software
How to Implement RIP on Cisco IOS XR Software
RC-345
Cisco IOS XR Routing Configuration Guide
OL-14356-01
5. end
or
commit
6. configure
7. router rip
8. route-policy route-policy-name {in | out}
9. end
or
commit]
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
route-policy name
Example:
RP/0/RP0/CPU0:router(config)# route-policy
IN-IPv4
Defines a route policy and enters route-policy configuration
mode.
Step 3
set rip-metric number
RP/0/RP0/CPU0:router(config-rpl)# set rip
metric 42
(Optional) Sets the RIP metric attribute.
Step 4
end-policy
Example:
RP/0/RP0/CPU0:router(config-rpl)# end-policy
Ends the definition of a route policy and exits route-policy
configuration mode.