Filter
Top Products
Implementing EIGRP on Cisco IOS XR Software
How to Implement EIGRP on Cisco IOS XR Software
RC-160
Cisco IOS XR Routing Configuration Guide
OL-14356-01
10. end
or
commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
router eigrp as-number
Example:
RP/0/RP0/CPU0:router(config)# router eigrp 100
Configures an EIGRP routing process.
Step 3
vrf vrf-name
Example:
RP/0/RP0/CPU0:router(config-eigrp)# vrf vrf_A
Configures a VPN routing and forwarding (VRF) instance.
Step 4
address-family {ipv4 | ipv6}
Example:
RP/0/RP0/CPU0:router(config-eigrp-vrf)#
address-family ipv4
Enters a VRF address family configuration mode.
Step 5
router-id router-id
Example:
RP/0/RP0/CPU0:router(config-eigrp-vrf-af)#
router-id 33
Configures a router ID for the EIGRP process.
Step 6
autonomous-system as-number
Example:
RP/0/RP0/CPU0:router(config-eigrp-vrf-af)#
autonomous-system 2
Configures an EIGRP routing process to run within the VRF
instance.
Step 7
redistribute {{bgp | connected | isis | ospf |
ospfv3 | rip | static} [as-number]}
[route-policy name]
Example:
RP/0/RP0/CPU0:router(config-eigrp-vrf-af)#
redistribute bgp 100
Injects routes from one routing domain into EIGRP.
Step 8
interface type instance
Example:
RP/0/RP0/CPU0:router(config-eigrp-vrf-af)#
interface gigabitEthernet 0/1/5/0
Configures the interface on which EIGRP the routing
protocol runs.