Filter
Top Products
Implementing and Monitoring RIB on Cisco IOS XR Software
How to Deploy and Monitor RIB
RC-326
Cisco IOS XR Routing Configuration Guide
OL-14356-01
Disabling RIB Next-hop Dampening
Perform this task to disable RIB next-hop dampening.
SUMMARY STEPS
1. router rib
2. address-family {ipv4 | ipv6} next-hop dampening disable
3. end
or
commit
Step 5
show route [vrf {vrf-name | all}] [afi-all |
ipv4 | ipv6] [unicast | multicast | safi-all]
local [interface] [standby]
Example:
RP/0/RP0/CPU0:router# show route ipv4 unicast
local
Displays local routes for receive entries in the routing table.
Step 6
show route [vrf {vrf-name | all}] [ipv4 | ipv6]
[unicast | multicast | safi-all]
longer-prefixes {ip-address mask |
ip-address/prefix-length} [standby]
Example:
RP/0/RP0/CPU0:router# show route ipv4 unicast
192.168.111/8 longer-prefixes
Displays the current routes in RIB that share a given number
of bits with a given network.
Step 7
show route [vrf {vrf-name | all}] [ipv4 | ipv6]
[unicast | multicast | safi-all] next-hop
ip-address [standby]
Example:
RP/0/RP0/CPU0:router# show route ipv4 unicast
next-hop 192.168.1.34
Displays the next-hop gateway or host to a destination
address.
Command or Action Purpose