Filter
Top Products
Implementing OSPF on Cisco IOS XR Software
Where to Go Next
RC-262
Cisco IOS XR Routing Configuration Guide
OL-14356-01
mpls ldp
router-id 2.2.2.1
interface GigabitEthernet0/2/0/3
!
!
end
Where to Go Next
To configure route maps through the RPL for OSPF Version 2, see the Implementing Routing Policy on
Cisco IOS XR Software document.
To build an MPLS TE topology, create tunnels, and configure forwarding over the tunnel for OSPF
Version 2; see the Cisco IOS XR MPLS Configuration Guide.
Additional References
The following sections provide references related to implementing OSPF on Cisco IOS XR software.
Related Documents
Standards
Related Topic Document Title
OSPF and OSPFv3 commands: complete command
syntax, command modes, command history, defaults,
usage guidelines, and examples
Cisco IOS XR Routing Command Reference
MPLS TE feature information Implementing MPLS Traffic Engineering on Cisco IOS XR Software
module in Cisco IOS XR MPLS Configuration Guide
Standards Title
draft-ietf-ospf-multi-area-adj-07.txt OSPF Multi-Area Adjacency
draft-ietf-pce-disco-proto-ospf-08.txt OSPF Protocol Extensions for Path Computation Element (PCE)
draft-ietf-mpls-igp-sync-00.txt LDP IGP Synchronization
draft-ietf-ospf-ospfv3-graceful-restart-07.txt OSPFv3 Graceful Restart