Cisco Systems OL-14356-01 Network Router User Manual


 
Implementing OSPF on Cisco IOS XR Software
How to Implement OSPF on Cisco IOS XR Software
RC-211
Cisco IOS XR Routing Configuration Guide
OL-14356-01
DETAILED STEPS
Command or Action Purpose
Step 1
show ospf [process-name]
or
show ospfv3 [process-name]
Example:
RP/0/RP0/CPU0:router# show ospf
or
RP/0/RP0/CPU0:router# show ospfv3
(Optional) Displays general information about OSPF
routing processes.
The output displays the router ID of the local router.
You need this router ID to configure the other end of the
link.
Step 2
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 3
router ospf process-name
or
router ospfv3 process-name
Example:
RP/0/RP0/CPU0:router(config)# router ospf 1
or
RP/0/RP0/CPU0:router(config)# router ospfv3 1
Enables OSPF routing for the specified routing process and
places the router in router configuration mode.
or
Enables OSPFv3 routing for the specified routing process
and places the router in router ospfv3 configuration mode.
Note The process-name argument is any alphanumeric
string no longer than 40 characters.
Step 4
router-id {router-id}
Example:
RP/0/RP0/CPU0:router(config-ospf)# router-id
192.168.4.3
Configures a router ID for the OSPF process.
Note We recommend using a stable IPv4 address as the
router ID.
Step 5
area area-id
Example:
RP/0/RP0/CPU0:router(config-ospf)# area 1
Enters area configuration mode and configures a
nonbackbone area for the OSPF process.
The area-id argument can be entered in dotted-decimal
or IPv4 address notation, such as area 1000 or
area 0.0.3.232. However, you must choose one form or
the other for an area. We recommend using the IPv4
address notation.
Step 6
virtual-link router-id
Example:
RP/0/RP0/CPU0:router(config-ospf-ar)# virtual
link 10.3.4.5
Defines an OSPF virtual link.
See the “Virtual Link and Transit Area for OSPF”
section on page RC-183.
Step 7
authentication message-digest
Example:
RP/0/RP0/CPU0:router(config-ospf-ar-vl)#
authentication message-digest
Selects MD5 authentication for this virtual link.