Filter
Top Products
- 147 -
GS C 2 n1 n2
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Setting the numbering counter
[Code] <1D>H<43>H<32>H<n1><n2>
[Range] 0≦n1≦255
0≦n2≦255
[Outline] [The specification which is common to the model]
This command sets the numbering (serial number counter) value.
n1+n2×256 (n1 = remainder, n2 = quotient) becomes a counter value.
[Caution] • If the counter is set with this command, a repeat count of the identical count will be cleared.
• If the counter value is beyond the range specified with the GS C1 or GS C; command, the counter
will be initialized.
[Default] Not defined.
[See Also] GS C 0、GS C 1、GS C ；、GS c
[Sample Program]
[Print Results]
See the Sample Program and Print Results for the GS C1 command.