Filter
Top Products
- 149 -
GS c
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Print the counter
[Code] <1D>H<63>H
[Outline] [The specification which is common to the model]
This command prints the serial number counter data.
After setting the current counter value in the print buffer as the print data (character string), it
increments or decrements the counter according to the set count mode.
[Caution] • The format used in setting the value to the print buffer depends on the GS C0 command.
• The count mode is set by the GS C1 or GS C; command. When execution of GS c command
results in excess of the counter final value, the counting returns to the final value of the counter.
[See Also] GS C 0、GS C 1、GS C 2、GS C ；
[Sample Program]
[Print Results]
See the Sample Program and Print Results for the GS C0 command.
See the Sample Program and Print Results for the GS C1 command.