Filter
Top Products
- 72 -
(2) If a sufficient area cannot be provided as a result of step (1), the print area is extended
toward the left (so, the left margin is decreased).
Printable area
Ａ
Left margin (1) Extended
(2) The left margin is trimmed toward the right
Print area width
(3) If a sufficient area cannot be provided as a result of step (2), the right spacing is trimmed.
• When mapping a bit image (or downloaded bit image), if the print area is narrower than the
minimum width of the bit image (two dots for single density, or one dot for double density), only
the line for that image is handled as follows:
(1) The print area is extended toward the left (so, the left margin is decreased) until it is equal to
the minimum width of the image, but not wider than the printable area.
[Default]
paper
width
print width/(dot) nL nH support model
CT-S4000 112mm 104mm/(832) 96 3
CT-S4000 112mm 90mm/(720) 208 2
83mm 82.5/(660) 148 2 CT-S4000
83mm 80mm/(640) 128 2 CT-S4000/CT-S2000/CT-S300/CT-S310
80mm 72mm/(576) 64 2
CT-S4000/CT-S2000/CT-S300/
BD2-2220/CT-S310/PMU2XXX
80mm 64mm/(512) 0 2 CT-S4000/CT-S2000/CT-S300/CT-S310
60mm 54.5mm/(436) 180 1 CT-S2000
58mm 54mm/(432) 176 1 CT-S2000/BD2-2220/PMU2XXX
58mm 52.5mm/(420) 156 1 CT-S2000
58mm 48mm/(384) 128 1 CT-S2000/CT-S300/CT-S280/CT-S310
58mm 45mm/(360) 104 1 CT-S2000/CT-S300/CT-S310
[See Also] GS L、GS P