Filter
Top Products
- 153 -
GS ( E pL pH fn […]
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Printer function setting command
[Outline] [The specification which is common to the model]
Printer function setting command is a command to change the function of the printer stored on the
non-volatile memory and executes the function set by the value of “fn”.
Function No.
(fn)
Function
Function1 Transfers to printer function setting mode.
Function 2 Terminates printer function setting mode.
Function 3 Sets memory switch value.
Function 4 Sends memory switch value set.
Function 5 Sets customize value.
Function 6 Sends customized value set.
Function 7 Copies user-defined page.
Function 8 Defines the data in column format to the character code page of work area.
Function 9 Defines the data in raster format to the character code page of work area.
Function 10 Erases the data of character code page of work area.
Function 11 Sets the communication condition of serial interface. (Note)
Function 12 Sends the communication condition of serial interface set.
Sets all contents set in printer function setting mode to the state at the time of
shipment.
Function 255
• pL, pH set the number of bytes following “fn” to (pL + pH 256).
• At the end of printer function setting mode (Function 2), resetting is executed. Then the input
buffer is cleared to return various kinds of setting to the state at the time of power on.
• The set value can be confirmed without transferring to printer function setting mode by functions
4, 6, and 12.
• Other functions do not operate without transferring to printer function setting mode.
[Caution] • This command allows writing to non-volatile memory. Therefore, using this command frequently
may result in breakage of memory. Use this command appropriately [10 times max./day].
• During execution of this command, the printer is in Busy state and stops receiving operation.
Therefore, data transmission from the host is prohibited.