Filter
Top Products
CT-S2000
• Printer information configuration on and after transmitted n=65 is shown
below.
n Type of Printer ID Specification Value (Hex.)
1、49
Model ID CT-S2000 51
Kind of Printer
Information
Information n
2、50
Type ID Refer to table “Type ID” below
3、51
ROM version ID Differs by ROM version.
65
Firmware version Differs by firmware version.
Black mark/ Label
Length
Depends on Black mark paper/ Label
paper (mm)
4、52
66 Manufacturer name CITIZEN
67 Model name CT-S2000
Japanese Kanji specifications: KANJI
Kinds of multi-language
fonts
Type ID If n = 2, 50 is specified:
Hangul specification：KOREA
69
Bit Meaning Hex. Decimal
Chinese specifications：CHINA
GB18030
0 Equipped for 2 byte code support 01 1
Refer to table “DSW” below
112 State of DSW
1 Equipped with auto cutter 02 2
(only serial model)
Thermal paper 00 0
2
Black mark paper/ Label paper
04 4
(when Black mark paper/ Label paper is selected)
• Sends printer information specified by n=65 or more.
Hex. Number of Data
3 Undefined -- --
4 Unused 00 0
Header 1
5FH
5 Undefined -- --
20H～7FH
Data Subject to item to be responded
6 Undefined -- --
NULL 00H 1
7 Unused 00 0
n = 4, 52 specified (only for B.M/Label specs)
DSW If n = 112 is specified:
The Black mark length/label gap length and mark interval/label length
currently used are returned in 4-byte code.All fractional parts in
millimeters are rounded off.
Bit Function Hex. Decimal
Dip switch [DSW5] is OFF 00 0
0
Byte 1 + Byte 2 x256 = Black mark interval
Dip switch [DSW5] is ON 01 1
Byte 3 + Byte 4 x256 = Black mark length mm
Dip switch [DSW6] is OFF 00 0
1
Dip switch [DSW6] is ON
02 2
(2)
Dip switch [DSW7] is OFF 00 0
2
Dip switch [DSW7] is ON 04 4
(1)
Dip switch [DSW8] is OFF 00 0
3
Dip switch [DSW8] is ON 08 8
4 Reserved 00 0
5 Reserved 00 0
6 Fixed
40 64
Black mark paper/Label paper
7 Fixed
00 0
*only serial model
- 231 -