Filter
Top Products
- 60 -
GS b n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Specifying/canceling the smoothing
[Code] <1D>H<62>H<n>
[Range] 0≦n≦255
[Outline] [The specification which is common to the model]
This command specifies or cancels the smoothing.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0 Function
0 The smoothing is canceled.
1 The smoothing is specified.
[Caution] • Smoothing is effective to printer’s internal characters, download characters, and non-standard
characters.
• Smoothing is not effective to characters with either of their vertical or horizontal magnification is
x1.
[Default] n=0
[See Also] ESC! 、GS !