Filter
Top Products
CT-S280
(1) Printer status (When n = 1 is specified) (3) Status caused by an error (when n = 3 is specified)
Bit Status Hex. Decimal Bit Status Hex. Decimal
0 Fixed 00 0 0 Fixed 00 0
1 Fixed 02 2 1 Fixed 02 2
2 Fixed 04 4 2 Fixed 00 0
Online status 00 0 3 Fixed 00 0
3
Offline status 08 8 4 Fixed 10 16
4 Fixed 10 16 Unrecoverable error not occurred 00 0
5
Not waiting online recovery 00 0
Unrecoverable error occurred 20 32
5
Waiting online recovery 20 32 Auto recovery error not occurred 00 0
6
FEED switch is not pressed 00 0 Auto recovery error occurred 40 64
6
FEED switch is pressed 40 64
7 Fixed 00 0
7 Fixed 00 0
Bit 6: If a head overheat error is detected, the printing is stopped until the
head temperature falls. At this time, bit 6 = 1.
(2) Status caused by an offline condition (When n = 2 is specified)
(4) Continuous paper detector status (When n = 4 is specified)
Bit Status Hex. Decimal
0 Unused 00 0
Bit Status Hex. Decimal
1 Unused 02 2
0 Fixed 00 0
Cover closed 00 0
1 Fixed 02 02
2
Cover open 04 4
Paper found by Paper Near-end Sensor 00 0
2
Not in paper feed state triggered by FEED
switch
00 0
Paper not found by Paper Near-end Sensor 04 4
3
Paper found by Paper Near-end Sensor 00 0
3
In paper feed state triggered by FEED switch 08 8
Paper not found by Paper Near-end Sensor 08 8
4 Unused 10 16
4 Fixed 10 16
Printing is not stopped because of “paper out”
state
00 0
Paper found by Paper-end Sensor 00 0
5
5
Paper not found by Paper-end Sensor 60 96
Printing is stopped because of “paper out” state 20 32
Paper found by Paper-end Sensor 00 0
6
Error not occurred 00 0
Paper not found by Paper-end Sensor 40 64
6
Error occurred 40 64
7 Fixed 00 0
7 Unused 00 0
Bit 5: Printing is stopped if the Paper-end detector detects a “paper out”
state, or if the printer is out of paper when the Paper Near-end
Sensor is enabled by ESC c 4. At this time, bit 5 = 1.
- 82 -