Filter
Top Products
- 42 -
ESC & s n m [ a [p] s x a ] m-n+1
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Defining the download characters
[Code] <1B>H<26>H<s>H<n>H<m>H［<a>H<p1>H<p2>･・･<ps×a>］m-n+1
[Range] s=3(Font A, B) s=2(FontC)
32≦n≦m≦127
0≦a≦12(Font A)
0≦a≦9 (Font B)
0≦a≦8 (Font C)
0≦p1･･ps×a≦255
[Outline] [The specification which is common to the model]
Defines the font of download characters of alphanumeric characters.
• “s” indicates the number of bytes in vertical direction.
• “n” indicates the start character code and “m” the end character code. To define only one
character, set n = m.
• Character codes definable includes 95 ASCII codes in total in the range of <20>H to <7E>H.
• “a” indicates the number of dots to be defined in horizontal direction.
• “p” is the data to be defined, which indicate a pattern equal to “a” dots in horizontal direction from
the left end. The rest of the pattern on the right side is filled with space.
• The number of data to be defined is “s x a”.
• Download characters thus defined remain valid until redefinition, execution of ESC @, GS *, FS q,
GS (A, deletion by ESC ?, or power OFF is performed.
[Caution] CT-S280/CT-S300/BD2-2220/CT-S310/PMU2XXX
• Running this command clears the definition of the download bit image.
CT-S2000/CT-S4000
• Running this command doesn't clear the definition of the download bit image.
[Default] Same as the internal character set.
[See Also] ESC %、ESC ?