Filter
Top Products
118
xe audit-log-get since=2009-09-24T17:56:20.530Z \
filename=/tmp/auditlog-pool-actions.out
Bonding Commands
Commands for working with network bonds, for resilience with physical interface failover. See the section called
“Creating NIC Bonds on a Standalone Host” for details.
The bond object is a reference object which glues together master and member PIFs. The master PIF is the bonding
interface which must be used as the overall PIF to refer to the bond. The member PIFs are a set of 2 or more
physical interfaces which have been combined into the high-level bonded interface.
Bond Parameters
Bonds have the following parameters:
Parameter Name Description Type
uuid unique identifier/object reference for the
bond
read only
master UUID for the master bond PIF read only
members set of UUIDs for the underlying bonded PIFs read only set parameter
bond-create
bond-create network-uuid=<network_uuid> pif-uuids=<pif_uuid_1,pif_uuid_2,...>
Create a bonded network interface on the network specified from a list of existing PIF objects. The command will
fail if PIFs are in another bond already, if any member has a VLAN tag set, if the referenced PIFs are not on the
same XenServer host, or if fewer than 2 PIFs are supplied.
bond-destroy
host-bond-destroy uuid=<bond_uuid>
Deletes a bonded interface specified by its UUID from a XenServer host.
CD Commands
Commands for working with physical CD/DVD drives on XenServer hosts.
CD Parameters
CDs have the following parameters:
Parameter Name Description Type
uuid unique identifier/object reference for the CD read only
name-label Name for the CD read/write
name-description Description text for the CD read/write
allowed-operations A list of the operations that can be
performed on this CD
read only set parameter
current-operations A list of the operations that are currently in
progress on this CD
read only set parameter