Filter
Top Products
120
List the CDs and ISOs (CD image files) on the XenServer host or pool, filtering on the optional argument params.
If the optional argument params is used, the value of params is a string containing a list of parameters of this
object that you want to display. Alternatively, you can use the keyword all to show all parameters. If params
is not used, the returned list shows a default subset of all available parameters.
Optional arguments can be any number of the CD parameters listed at the beginning of this section.
Console Commands
Commands for working with consoles.
The console objects can be listed with the standard object listing command (xe console-list), and the parameters
manipulated with the standard parameter commands. See the section called “Low-level Parameter Commands”
for details.
Console Parameters
Consoles have the following parameters:
Parameter Name Description Type
uuid The unique identifier/object reference for
the console
read only
vm-uuid The unique identifier/object reference of
the VM this console is open on
read only
vm-name-label The name of the VM this console is open on read only
protocol Protocol this console uses. Possible values
are vt100: VT100 terminal, rfb: Remote
FrameBuffer protocol (as used in VNC), or
rdp: Remote Desktop Protocol
read only
location URI for the console service read only
other-config A list of key/value pairs that specify
additional configuration parameters for the
console.
read/write map parameter
Disaster Recovery (DR) Commands
Commands for recovering VMs in the event of disaster
drtask-create
drtask-create type=<type> sr-whitelist=<sr-white-list> device-config=<device-config>
Creates a disaster recovery task. For example, to connect to an iSCSI SR in preparation for Disaster Recovery:
xe dr-task-create type=lvmoiscsi device-config:target=<target-ip-address> \
device-config:targetIQN=<targetIQN> device-config:SCSIid=<SCSIid> \
sr-whitelist=<sr-uuid-list>
Note: