Filter
Top Products
47
xe sr-probe type=lvmohba \
host-uuid=1212c7b3-f333-4a8d-a6fb-80c5b79b5b31
Error code: SR_BACKEND_FAILURE_90
Error parameters: , The request is missing the device parameter, \
<?xml version="1.0" ?>
<Devlist>
<BlockDevice>
<path>
/dev/disk/by-id/scsi-360a9800068666949673446387665336f
</path>
<vendor>
HITACHI
</vendor>
<serial>
730157980002
</serial>
<size>
80530636800
</size>
<adapter>
4
</adapter>
<channel>
0
</channel>
<id>
4
</id>
<lun>
2
</lun>
<hba>
qla2xxx
</hba>
</BlockDevice>
<Adapter>
<host>
Host4
</host>
<name>
qla2xxx
</name>
<manufacturer>
QLogic HBA Driver
</manufacturer>
<id>
4
</id>
</Adapter>
</Devlist>
4. On the master host of the pool create the SR, specifying the global device path returned in the <path>
property from sr-probe. PBDs will be created and plugged for each host in the pool automatically.
xe sr-create host-uuid=<valid_uuid> \
content-type=user \
name-label=<"Example shared LVM over HBA SR"> shared=true \
device-config:SCSIid=<device_scsi_id> type=lvmohba
Note:
You can use the XenCenter Repair Storage Repository function to retry the PBD creation
and plugging portions of the sr-create operation. This can be valuable in cases where the
LUN zoning was incorrect for one or more hosts in a pool when the SR was created. Correct