Filter
Top Products
138
Parameter Name Description Type
other-config:ethtool-
autoneg
set to no to disable autonegotiation of the
physical interface or bridge. Default is yes.
read write
other-config:ethtool-rx set to on to enable receive checksum, off
to disable
read write
other-config:ethtool-tx set to on to enable transmit checksum, off
to disable
read write
other-config:ethtool-sg set to on to enable scatter gather, off to
disable
read write
other-config:ethtool-tso set to on to enable tcp segmentation
offload, off to disable
read write
other-config:ethtool-ufo set to on to enable UDP fragment offload,
off to disable
read write
other-config:ethtool-gso set to on to enable generic segmentation
offload, off to disable
read write
blobs Binary data store read only
network-create
network-create name-label=<name_for_network> [name-description=<descriptive_text>]
Creates a new network.
network-destroy
network-destroy uuid=<network_uuid>
Destroys an existing network.
Patch (Update) Commands
Commands for working with XenServer host patches (updates). These are for the standard non-OEM editions
of XenServer for commands relating to updating the OEM edition of XenServer, see the section called “Update
Commands” for details.
The patch objects can be listed with the standard object listing command (xe patch-list), and the parameters
manipulated with the standard parameter commands. See the section called “Low-level Parameter Commands”
for details.
Patch Parameters
Patches have the following parameters:
Parameter Name Description Type
uuid The unique identifier/object reference for
the patch
read only
host-uuid The unique identifier for the XenServer host
to query
read only