184
xe pool-retrieve-wlb-report report=pool_health_history \
LocaleCode=<en> \
Start=<-3> \
End=<0> \
PoolID=<c75f9ee9-422f-9cde-4781-24f6cbd9279c> \
UTCOffset=<-5> \
filename=</pool_health_history>.txt \
xe pool-retrieve-wlb-report report=vm_movement_history \
LocaleCode=<en> \
Start=<-3> \
End=<0> \
PoolID=<c75f9ee9-422f-9cde-4781-24f6cbd9279c> \
UTCOffset=<-5> \
filename=</vm_movement_history>.txt \
xe pool-retrieve-wlb-report report=vm_performance_history \
LocaleCode=<en> \
Start=<-3> \
End=<0> \
PoolID=<c75f9ee9-422f-9cde-4781-24f6cbd9279c> \
HostID=<471626e5-8e8b-429b-9990-6013726d7e86> \
UTCOffset=<-5> \
filename=</vm_performance_history>.txt \
xe pool-retrieve-wlb-report report=pool_audit_history \
LocaleCode=<en> \
Start=<-3> \
End=<0> \
PoolID=<c75f9ee9-422f-9cde-4781-24f6cbd9279c> \
UTCOffset=<-5> \
filename=</pool_audit_history>.txt \
xe pool-retrieve-wlb-report report=pool_optimization_history
LocaleCode=<en>
Start=<-3>
End=<0>
PoolID=<c75f9ee9-422f-9cde-4781-24f6cbd9279c>
UTCOffset=<-5>
filename=</pool_optimization_history>.txt
xe pool-retrieve-wlb-report report=vm_chargeback_history
LocaleCode=<en>
Start=<-3>
End=<0>
PoolID=<c75f9ee9-422f-9cde-4781-24f6cbd9279c>
UTCOffset=<-5>
filename=</vm_chargeback_history>.txt
pool-send-wlb-configuration
Modifies Workload Balancing configuration settings, including thresholds, Workload Balancing power-
management settings, and weightings. It is not mandatory to configure all settings with the command. You can
configure only some parameters, but not all, if desired.
Before using the pool-send-wlb-configuration command, learn about the default values on your system by
running pool-retrieve-wlb-configuration.
When you run the pool-retrieve-wlb-configuration command, additional parameters appear that are not
documented in this section. Citrix does not recommend editing these parameters.
pool-send-wlb-configuration
[config:HostMemoryThresholdCritical=<HostCpuThresholdCritical=value>\
config:HostMemoryThresholdHigh=<HostMemoryThresholdHigh=value>\