Filter
Top Products
CY7C67200
Document #: 38-08014 Rev. *G Page 11 of 78
Bank Register [0xC002] [R/W]
Figure 8. Bank Register
Register Description
The Bank register maps registers R0–R15 into RAM. The
eleven MSBs of this register are used as a base address for
registers R0–R15. A register address is automatically
generated by:
1. Shifting the four LSBs of the register address left by 1
2. ORing the four shifted bits of the register address with the
12 MSBs of the Bank Register
3. Forcing the LSB to zero
For example, if the Bank register is left at its default value of
0x0100, and R2 is read, then the physical address 0x0102 will
be read. See Table 17 for details.
.
Address (Bits [15:4])
The Address field is used as a base address for all register
addresses to start from.
Reserved
All reserved bits must be written as ‘0’.
Hardware Revision Register [0xC004] [R]
Figure 9. Revision Register
Register Description
The Hardware Revision register is a read-only register that
indicates the silicon revision number. The first silicon revision
is represented by 0x0101. This number is increased by one for
each new silicon revision.
Revision (Bits [15:0])
The Revision field contains the silicon revision number.
Bit # 15 14 13 12 11 10 9 8
Field Address...
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W
Default 0 0 0 0 0 0 0 1
Bit # 7 6 5 4 3 2 1 0
Field ...Address Reserved
Read/Write R/W R/W R/W - - - - -
Default 0 0 0 X X X X X
Table 17.Bank Register Example
Register Hex Value Binary Value
Bank 0x0100 0000 0001 0000 0000
R14 0x000E << 1 = 0x001C 0000 0000 0001 1100
RAM
Location
0x011C 0000 0001 0001 1100
Bit # 15 14 13 12 11 10 9 8
Field Revision...
Read/Write R R R R R R R R
Default X X X X X X X X
Bit # 7 6 5 4 3 2 1 0
Field ...Revision
Read/Write R R R R R R R R
Default X X X X X X X X
[+] Feedback