Filter
Top Products
CY7C67200
Document #: 38-08014 Rev. *G Page 78 of 78
Document History Page
Document Title: CY7C67200 EZ-OTG™ Programmable USB On-The-Go Host/Peripheral Controller
Document Number: 38-08014
REV. ECN NO.
Issue
Date
Orig. of
Change
Description of Change
** 111872 03/22/02 MUL New Data Sheet
*A 116988 08/23/02 MUL Preliminary Data Sheet
*B 124954 04/10/03 MUL Added Memory Map Section and Ordering Information Section
Moved Functional Register Map Tables into Register section
General Clean-up
Changed from “Preliminary“ to “Preliminary Confidential“
*C 126211 05/23/03 MUL Added Interface Description Section and Power Savings and Reset Section
Added Char Data
General Clean-up
Removed DRAM, MDMA, and EPP
Added “Programmable” to the title page
*D 127334 05/29/03 KKV Corrected font to enable correct symbol display
*E 129394 10/07/03 MUL Final Data Sheet
Changed Memory Map Section
Added USB OTG Logo
General Clean-up
*F 472875 See ECN ARI Removed “power consumption” bullet from the Features bullet list.
Corrected number GPIO[31:20] to read GPIO[31:30] in Section “Standalone
Mode”.
Made sentence into a Note in Section “Reset Pin” and repeated the note in
Section “Host Port Interface (HPI)”.
Corrected the Host/Device 1 Interrupt Enable (Bit 8) Information in Section
“Interrupt Enable Register [0xC00E] [R/W]”.
Corrected data on Write Protect Enable (Bit 15) Section “GPIO Control
Register [0xC006] [R/W]” to read “the GPIO Mode Select [15:8] bits are read
only until a chip reset“.
Re-wrote the Register Description in Section “SIEXmsg Register [W]”.
Put document on 2-column template and corrected grammar. Put the figure
captions at the top of the figures per new template specifications.
Added Static Discharge Voltage information in Section “Absolute Maximum
Ratings”
Added compliance statement and TID in Section “USB Transceiver”.
*G 567317 See ECN KKVTMP Added the lead free information on the Ordering Information Section. Imple-
mented the new template with no numbers on the headings.
[+] Feedback