Filter
Top Products
CY7C67200
Document #: 38-08014 Rev. *G Page 21 of 78
Host n Address Register [R/W]
• Host 1 Address Register 0xC082
• Host 2 Address Register 0xC0A2
Figure 19. Host n Address Register
Register Description
The Host n Address register is used as the base pointer into
memory space for the current host transactions.
Address (Bits [15:0])
The Address field sets the address pointer into internal RAM
or ROM.
Host n Count Register [R/W]
• Host 1 Count Register 0xC084
• Host 2 Count Register 0xC0A4
Figure 20. Host n Count Register
Register Description
The Host n Count register is used to hold the number of bytes
(packet length) for the current transaction. The maximum
packet length is 1023 bytes in ISO mode. The Host Count
value is used to determine how many bytes to transmit, or the
maximum number of bytes to receive. If the number of
received bytes is greater then the Host Count value then an
overflow condition will be flagged by the Overflow bit in the
Host n Endpoint Status register.
Count (Bits [9:0])
The Count field sets the value for the current transaction data
packet length. This value is retained when switching between
host and device mode, and back again.
Reserved
All reserved bits must be written as ‘0’.
Bit # 15 14 13 12 11 10 9 8
Field Address...
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W
Default 0 0 0 0 0 0 0 0
Bit # 7 6 5 4 3 2 1 0
Field ...Address
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W
Default 0 0 0 0 0 0 0 0
Bit # 15 14 13 12 11 10 9 8
Field Reserved Count...
Read/Write - - - - - - R/W R/W
Default 0 0 0 0 0 0 0 0
Bit # 7 6 5 4 3 2 1 0
Field ...Count
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W
Default 0 0 0 0 0 0 0 0
[+] Feedback