Dell MD3000i Network Router User Manual


 
38 Using the F6 Option to Configure Intel BFi
Additional Information
NIC teaming is not supported for iSCSI traffic on the host or on the
PowerVault MD3000i storage array.
If you are using two NICs — one as primary NIC and one as the secondary
boot NIC, ensure that they are configured to use separate subnets.
After the host is configured to use BFi, you can configure additional paths
to other targets in the Microsoft iSCSI Software Initiator.
Do not log in to ports that were configured in the iSCSI boot BIOS, these
logins are automatically performed through the NIC iSCSI boot firmware
table.