![](http://pdfasset.owneriq.net/c/12/c1211803-deb5-448e-852b-9ca2202116a4/c1211803-deb5-448e-852b-9ca2202116a4-bg35.png)
Instructions to Configure BFi for Broadcom NIC 53
Additional Information
• NIC teaming is not supported for iSCSI traffic on the host or on the
PowerVault MD3000i storage array.
• If you are using two NICs — one as primary NIC and one as the secondary
boot NIC, ensure that they are configured to use separate subnets.
• After the host is configured to use BFi, you can configure additional paths
to other targets in the Microsoft iSCSI Software Initiator.
• Do not log in to ports that were configured in the iSCSI boot BIOS, these
logins are automatically performed through the NIC iSCSI boot firmware
table.