Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 25 of 106 Revision A01
3. Secure the docking door with the 6 screws provided.
6.3 VGA Door
The VGA Door is located on the rear panel of the notebook, and protects the serial and video
connectors.
6.3.1 Removing the VGA Door
NOTE: The VGA Door is secured by 3 screws. To access all the screws the notebook must be
turned over. When facing the VGA Door, the right screw is accessed from the top, and the 2 left
screws are accessed from the front.
1. Turn the notebook top side down, to access the VGA Door on the rear panel of the notebook.
2. Remove the 3 screws that secure the VGA Door (one screw on the top right, the other 2 on
the front left).