Filter
Top Products
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 78 of 106 Revision A01
14 Palm Rest
CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
14.1 Removing the Palm Rest
1. Follow the instructions in
164H
Before You Begin
.
2. Remove the hinge cover (see
165H
Removing the Hinge Cover
).
3. Remove any installed media bay device (see
166H
XBay Devices
).
4. Remove the keyboard (see
167H
Keyboards
).
5. Remove the display assembly (see
168H
Removing the Display Assembly
).
6. Disconnect the coin-cell battery from the system board (see
169H
Coin-Cell Battery
).
NOTE: You can leave the coin-cell battery in place (on the palm rest) unless you are
installing a replacement palm rest, in which case you need to remove the coin-cell battery
and place it in the replacement palm rest.
7. Remove the five screws from the top of the palm rest.
Palm rest
screws