Filter
Top Products
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 94 of 106 Revision A01
1. Follow the instructions in
248H
Before You Begin
.
2. Remove the hinge cover (see
249H
Removing the Hinge Cover
).
3. Remove any installed media bay device (see
250H
XBay Devices
).
4. Remove the keyboard (see
251H
Keyboards
).
5. Remove the display assembly (see
252H
Removing the Display Assembly
).
6. Remove the palm rest (see
253H
Removing the Palm Rest
).
7. Remove the processor thermal-cooling assembly (see
254H
Removing the Processor Thermal-
Cooling Assembly
).
8. Remove the 3 M3 x 4-mm screws that secure the fan to the base.
1
Fan connector
2
Fan cable
3
Fan cable grommet
4
Fan
9. Disconnect the fan cable from the system board and remove the fan.
21.2 Installing the Fan
1. Install the fan and attach to the base using the 3 M3 x 4-mm screws.
2. Attach the fan cable to the system board. Then attach the grommet on the fan cable to the
cage enclosure.
3. Replace the processor thermal-cooling assembly (see
255H
Installing the Processor Thermal-Cooling
Assembly
).
4. Replace the palm rest (see
256H
Installing the Palm Rest
).
NOTE: Ensure that you reconnect the coin-cell battery (see
257H
Coin-Cell Battery
) before you replace
the keyboard.
1
2
3
4