Filter
Top Products
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 54 of 106 Revision A01
1
Screws (4)
2
Memory module cover
3
Memory module compartment
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the
memory-module securing clips.
3. If you are replacing a memory module, ground yourself and remove the existing module:
a. Use your fingertips to carefully spread apart the securing clips on each end of the
memory module connector until the module pops up.
b. Remove the module from the connector.
1
securing clips (2)
2
memory module
NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector.
4. Ground yourself and install the new memory module:
a. Align the notch in the module edge connector with the tab in the connector slot.
1
2
3