Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 76 of 106 Revision A01
1
SIM card
2
metal brackets (2)
NOTICE: To prevent electrostatic discharge (ESD), hold the card in your hand before you insert
or remove the card. Do not touch the SIM card connectors.
2. Turn the computer upside-down with the front of the computer facing you.
3. Ensure that the battery is removed (see
158H
Before Working Inside Your Computer
).
4. With the cut-off corner on the card facing away from the card compartment, insert the SIM
card into the compartment (as shown) so that it slides under the metal bracket on the sides.
5. Replace the battery and battery cover.
13 Coin-Cell Battery
CAUTION: Before working inside your computer, follow the safety instructions in your
XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching a connector on the back panel of the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you
begin working inside the computer.
13.1 Removing the Coin-Cell Battery
1. Follow the procedures in
159H
Before You Begin
.
2. Remove the hinge cover (see
160H
Removing the Hinge Cover
).
3. Remove the keyboard (see
161H
Keyboards
).