Filter
Top Products
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 40 of 106 Revision A01
XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
1. Follow the instructions in
99H
Before You Begin
.
2. Turn the computer right-side up and open it.
3. Remove the hinge cover (see
100H
Removing the Hinge Cover
).
NOTICE: Do not remove the keyboard from the keyboard tray! You are removing the entire
tray, not just the keyboard. The normal keyboard screws above the keyboard attach the
keyboard to the tray. See next step for keyboard tray removal.
4. Loosen the fifteen keyboard tray captive screws.
1
Keyboard tray captive screw (15)
NOTE: Lift the keyboard carefully in step 5 to ensure that you do not pull on the keyboard cable.
5. Lift the keyboard tray slightly.
6. Pull up on the pull-tab to disconnect the keyboard cable connector from the keyboard
connector on the system board.
1