Filter
Top Products
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 62 of 106 Revision A01
Grommets
8. Install the keyboard (see
118H
Keyboards
).
9. Install the hinge cover (see
119H
Installing the Hinge Cover
).
10.3 Removing the Display Bezel
CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
NOTE: Replacing the display bezel does not require removing the display assembly from the
base.
NOTE: Replacement keyboard/palm rest overlays are not included in the bezel service kits.
1. Follow the instructions in
120H
Before You Begin
.
2. Turn the computer top-side up, and then open the display all the way (160 degrees).
3. Remove bezel overlay. Start in the upper left or right corner to peel the overlay off of the
bezel.
1
2
3
4
Top of Display