Delta Electronics VFD-EL Power Supply User Manual


 
Chapter 4 Parameters|
Revision August 2008, 2ELE, V1.02 4-105
10.17
Minimum PID Output Frequency Selection
Factory Setting: 0
Settings 0 By PID control
1 By Minimum output frequency (Pr.01.05)
This is the source selection of minimum output frequency when control is by PID.
10.18 PID Control Detection Signal Reference Unit: 0.1
Settings 1.0 to 99.9 Factory Setting: 99.9
When Pr.00.04 is set to 8, it will display 00:00 as follows.
This parameter is used only for display and has no relation with Pr.00.13, Pr.00.14, Pr.02.18
and Pr.02.19.
(the max. value you would
like to convert)
Setpoint
Feedback value
10.19
PID Calculation Mode Selection
Factory Setting: 0
Settings 0 Series mode
1 Parallel mode
Series mode
P
10.0 2
I
10.03
D
10.04
10.05
10.10
10.0 7
10.06
10.01
+
-
+
+
+
Setpoint
Input Freq.
Gain
PID
feedback
Integral
gain
limit
Output
Freq.
Limit
Digital
filter
Freq.
Command
Parallel mode