Filter
Top Products
115
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.13.1 SNALI – SIGTRAN Application Server List Initiate
Synopsis
This command attaches a list of SIGTRAN links to an Application Server (AS). The SIGTRAN links provide the
SCTP associations to reach the AS.
See Section 7.2, “Signaling Configuration” on page 136 for a more detailed description of SIGTRAN signaling
configuration.
Syntax
SNALI:AS=,SEQ=,SNLINK=;
Prerequisites
• The AS has already been initiated.
• The specified SIGTRAN link has already been initiated.
• A SIGTRAN link cannot be specified in more than one hunt sequence position for this server.
• The server/hunt sequence combination must not already be initiated.
• The SIGTRAN links attached to the server must be M3UA and their peers be able to process ASs (that is,
not act as Signaling Gateways).
• A SNLINK cannot be attached to more than 32 ASs.
• The SNTYPE of the SNLINK cannot be M2PA.
Attributes
CONFIG
Examples
SNALI:AS=1,SEQ=1,SNLINK=1;
6.13.2 SNALE – SIGTRAN Application Server List End
Synopsis
This command ends a relationship between an Application Server (AS) and a SIGTRAN link.
Syntax
SNALE:AS=,SEQ=;
Prerequisites
• The AS sequence combination has already be initiated.
• The last entry in a list of SIGTRAN links attached to an AS cannot be removed unless the AS is blocked.
Attributes
CONFIG
Examples
SNALE:AS=,SEQ=;