Filter
Top Products
133
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.14.10 STSLP – Status SIGTRAN Link Print
Synopsis
This command requests the status of a SIGTRAN link.
Definitions for the status of the peer signaling process (SP):
• BLOCKED - The signaling link is blocked.
• UNAVAILABLE - The signaling link is unavailable.
• AVAILABLE - The signaling link is available.
Note: The SP STATUS is blank for M2PA SNLINKs. Layer 2 status is provided by the STC7P command.
Definitions for SCTP Status are:
• CONFIGURING - Association is being configured.
• COOKIE_WAIT - Association is waiting for a cookie.
• COOKIE_ECHOED - Association has echoed a cookie.
• CLOSED - Association is closed.
• INITIATING - Association is initiating.
• ESTABLISHED - Association is established.
• SHUTDOWN_PENDING - Association is pending shutdown.
• SHUTDOWN_SENT - Association has sent shutdown.
• SHUTDOWN_RECEIVED - Association has received shutdown.
• SHUTDOWN_ACK_SENT - Association has shutdown.
Definitions of the status of Links IP Addresses are:
• INACTIVE - Network address is inactive.
• ACTIVE - Network address is available for data transfer.
• BLOCKED - Network address is blocked.
The Retransmission TimeOut (RTO) is a time between 500 and 6000 milliseconds where SCTP waits before
retransmitting an octet to an IP address. The timeout dynamically changes based on line conditions and
provides an indication on the quality of the connection to that IP address.
Syntax
STSLP:[SNLINK=…];
Prerequisites
• If specified, the SIGTRAN link should already have been initiated.
Attributes
None
Examples
STSLP:SNLINK=1;
Output Format
Page 1 of 2 SIGTRAN Signaling Link Status
SNLINK SP STATUS SCTP STATUS LABEL
1 AVAILABLE ESTABLISHED
2 BlOCKED
EXECUTED
Page 1 of 2 SIGTRAN Signaling Link Status
SNLINK IPADDR STATUS IPADDR RTO IPADDR2 STATUS IPADDR2 RTO LABEL
1 ACTIVE 500 ACTIVE 1500
2 BlOCKED
EXECUTED