Filter
Top Products
126
Chapter 6 Command Definitions
6.14.3 STBOP – Status Board Print
Synopsis
This command requests a status report of boards on the system. Possible status values are:
• INACTIVE - The board is not in operation.
• RESETTING - The board is undergoing a reset.
• ACTIVE - The board is operational.
• FAILED - The board has failed and is out of service.
Syntax
STBOP:[BPOS=…];
Prerequisites
• If specified, the board should have already been initiated.
Attributes
None
Examples
STBOP:BPOS=1;
Output Format
Board Status
BPOS STATUS
Active
Failed
Blocked
EXECUTED