Filter
Top Products
72
Chapter 6 Command Definitions
6.6.7 C7RTE – CCS SS7 Route End
Synopsis
This command is used to end an SS7 Signaling Route.
Syntax
C7RTE:C7RT=,NC=;
Prerequisites
• All SS7 signaling links must be blocked.
Note: After blocking an SS7 link cannot be unblocked until all the boards processing the SS7 signaling
are blocked and then unblocked.
• The specified route and NC combination has already been initiated.
Attributes
CONFIG
Examples
C7RTE:C7RT=1,NC=1;
6.6.8 C7RTP – CCS SS7 Route Print
Synopsis
This command shows the attributes of the specified SS7 Route or range of routes within a network context.
If no route or network context is specified, the values for all routes are shown.
Syntax
C7RTP;
C7RTP:NC=;
C7RTP:C7RT=,NC=;
Prerequisites
None
Attributes
None
Examples
C7RTP;
Output Format
CCITT SS7 Signaling Route Configuration
C7RT NC DPC LS1 LS2 LSH LABEL
1 1 2 1 3 Y LONDON
2 1 3 2 4 N EDINBURGH
3 1 DFLT 5 N DEFAULT
1 2 66 12 13 N BATH
EXECUTED