Filter
Top Products
118
Chapter 6 Command Definitions
6.13.7 SNNAI – SIGTRAN Network Appearance Initiate
Synopsis
This command initiates a relationship between a Network Context and a Network Appearance on a per
SIGTRAN link basis.
See Section 7.2, “Signaling Configuration” on page 136 for a more detailed description of SIGTRAN signaling
configuration.
Syntax
SNNAI:NC=,SNLINK=,SS7MD=,NA=;
Prerequisites
• The SNLINK has been already initiated.
• The SS7MD associated with the NC cannot be different to a SS7MD associated with a NC anywhere else
in the system.
• There is a one-to-one relation between NC and NA on a SNLINK.
• The NC cannot be the default value for this SNLINK.
• The SNTYPE of the SNLINK cannot be M2PA.
Attributes
CONFIG
Examples
SNNAI:NC=1,SNLINK=1,SS7MD=ITU14,NA=63;
6.13.8 SNNAE – SIGTRAN Network Appearance End
Synopsis
This command ends a relationship between an NC and NA on a per SNLINK basis.
Syntax
SNNAE:SNLINK=,NC=;
Prerequisites
• The NC has already been initiated.
• The SNLINK has already been initiated.
• There is a configured relationship between NC and NA in this SNLINK.
• There are no unblocked ASs using this SNLINK and NC combination.
• If the SNLINK is unblocked, there are NA mapping in other Network Contexts for the SNLINK.
Attributes
CONFIG
Examples
SNNAE:SNLINK=1,NC=1;