Filter
Top Products
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 49. Access Rule Table (Ethernet)
To remove a previously created rule, select it and click the
button. To add a new Access Rule, click the Add button:
Figure 7- 50. Access Rule Configuration window (Ethernet)
To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
Parameter Description
Profile ID
This is the identifier number for this
profile set.
Access ID
Type in a unique identifier number for
this access. This value can be set from 1
- 50.
Mode
Select Permit to specify that the packets
that match the access profile are
91