Filter
Top Products
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 9- 6. Rx Packets Analysis window (table for Unicast, Multicast, and Broadcast Packets)
The following fields can be set:
Parameter Description
Time Interval [1s ]
Select the desired setting between 1s and 60s,
where “s” stands for seconds. The default
value is one second.
Record Number [200]
Select number of times the Switch will be
polled between 20 and 200. The default value
is 20.
Unicast
Counts the total number of good packets that
were received by a unicast address.
Multicast
Counts the total number of good packets that
were received by a multicast address.
Broadcast
Counts the total number of good packets that
were received by a broadcast address.
Show/Hide
Check whether or not to display Multicast,
Broadcast, and Unicast Packets.
Clear
Clicking this button clears all statistics
counters on this window.
128