Filter
Top Products
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 9- 12. Tx Error Analysis window (table)
The following fields can be set:
Parameter Description
Time Interval [1s ]
Select the desired setting between 1s and 60s,
where “s” stands for seconds. The default
value is one second.
Record Number [200]
Select number of times the Switch will be
polled between 20 and 200. The default value
is 20.
ExDefer
Counts the number of frames for which the
first transmission attempt on a particular
interface was delayed because the medium
was busy.
LateColl
Counts the number of times that a collision is
detected later than 512 bit-times into the
transmission of a packet.
Show/Hide
Check whether or not to display ExDefer,
LateColl, ExColl, SingColl, and Coll errors.
Clear
Clicking this button clears all statistics
counters on this window.
View Table
Clicking this button instructs the Switch to
display a table rather than a line graph.
134