Filter
Top Products
D-Link DES-3250TG Standalone Layer 2 Switch
Section 8
Management
A
B
C
Security IP
User Accounts
SNMP V3
The DES-3250TG allows you to manage the switch via the Management menu.
Security IP
Some settings must be entered to allow the switch to be managed from an SNMP-based Network Management System such as
SNMP v1 or to be able to access the Switch using the Telnet protocol or the Web Manager.
To setup the switch for remote management:
Click the Security IP link in the Management menu:
Figure 8- 1. Security IP Management window
Management stations are computers on the network that will be used to manage the switch. You can limit the number of
possible management stations by entering up to eight IP addresses. If the eight IP Address fields contain all zeros (“0”), then
any station with any IP address can access the switch to manage and configure it. If there is one or more IP addresses entered
in the IP Address fields, then only stations with the IP addresses entered will be allowed to access the switch to manage or
configure it.
User Accounts
From the Management menu, click User Accounts and then the User Account Management window appears.
112